MTS Systems
Advantage 10 N Pneumatic Grips
These 10 N capacity (2 lbf) pneumatic grips are designed for low tensile applications and work well on thin specimens with low breaking strengths like the gold wire in electronics, tungsten…
Materials Test Systems
MTS testing systems, accessories and software for materials testing.
MTS Materials Test Systems
Products (133)
MTS Systems
Advantage 100/200 N & 2 kN Pneumatic Grips
Designed for testing thin sheets, films and tapes, these 100/200 N and 2 kN (20/40 lbf and 400 lbf) pneumatic grips will let you perform tests with your low capacity load cells without…
MTS Systems
Advantage 100/200 N & 2 kN Pneumatic Grip Faces
Faces for the 100/200 N and 2 kN (20/40 lbf and 400 lbf) pneumatic grips are available with a variety of surface coatings to accommodate a wide range of materials.
MTS Systems
Advantage 10 kN Pneumatic Grip
These 10 kN (2.2 kip) capacity pneumatic grips are designed for performing tensile tests on a variety of materials including elastomers, plastics, rigid and semi-rigid films, and sheets.
MTS Systems
Fundamental Pneumatic Vise Grips
MTS Fundamental™ Pneumatic Vise Grips are value-priced grips for tensile testing of plastic films, sheet materials, paper, and packaging components.
MTS Systems
Fundamental Pneumatic Bollard Grips
MTS Fundamental™ Pneumatic Bollard Grips are value-priced, “horn” style grips designed to reduce stress concentration on specimens and avoid grip-induced failures.
MTS Systems
Advantage Pneumatic Grip Controllers
These MTS Advantage™ Pneumatic Grip Controllers provide open/close function for Advantage Pneumatic Grips to regulate air pressure and control air flow to upper and lower grips.
MTS Systems
Fundamental Pneumatic Grip Controller
The Fundamental™ Pneumatic Grip Controller is required for proper operation of Fundamental Pneumatic Bollard and Vise Grips.
MTS Systems
Bionix Vise Grips
Bionix® Vise Grips are miniature, medium, and heavy-duty general purpose tensile grips that use a clamping screw to tighten a vise; each order includes a set of rubber faces.
MTS Systems
Bionix Scissor Grips
Bionix® Scissors Grips are self-tightening, and self-aligning grips featuring diamond faces.
MTS Systems
Bionix Roller Grips
Versatile Bionix® Roller Grips are quick-loading and self-tightening roller grips suitable for testing bandages, bio-textiles, diapers, synthetics, and flexible polymers at temperatures…
MTS Systems
Bionix Bollard Grips
Bionix® Bollard Grips are “horn” style grips designed to reduce stress concentration on specimens and avoid grip-induced failures.
MTS Systems
Bionix Spring Grips
Bionix® Spring Grips are a reliable choice for low-force biomedical testing applications.
MTS Systems
Model 642 Bend Fixtures
Model 642 Bend Fixtures are configured to meet a variety of testing requirements.
MTS Systems
3-Point Bend Fixtures
These 3-Point Bend Fixtures are designed to use with Exceed® load frames and can also be used on Criterion® load frames with appropriate conversion adapters.
MTS Systems
10kN Wood Bend Fixtures
These 10kN Wood Bend Fixtures are designed for use with Exceed® load frames and can also be used on Criterion® load frames with appropriate conversion adapters.
MTS Systems
Modified Celanese Compression Composite Fixture
This Modified Celanese Compression Loading Composite Fixture is design based on the University of Wyoming Modified Celanese Compression Test Fixture.
MTS Systems
IITRI Compression Loading Composite Fixture
This IITRI Compression Loading Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D3410 and ISO 14126 Method 1B.
MTS Systems
Combined Loading Compression (CLC) Composite Fixture
This Combined Loading Compression (CLC) Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D6641.
MTS Systems
V-Notched Rail Shear Composite Fixture
This V-Notched Rail Shear Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D7078.
MTS Systems
V-Notched Beam Shear Composite Fixture
This V-Notched Beam (Iosipescu) Shear Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D5379.
MTS Systems
Short Beam Shear & Three-Point Flexure Composite Fixture
This Short Beam Shear & Three-Point Flexure Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D2344.
MTS Systems
Mixed Mode Bending Composite Fixture
This Mixed Mode Bending Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D6671.
MTS Systems
Open/Filled Hole Compression Composite Fixture
This Open/Filled Hole Compression Composite Fixture is constructed out of high quality stainless steel and is recommended to test in accordance with ASTM D6484, ASTM D6742 and BS 07260.
Product information is based on the official MTS Systems Materials Test Systems catalogue (mts.com). Specifications are subject to change by the manufacturer; please confirm details with our team.
Need Help Choosing?
Talk to Our Technical Team
Tell us about your specimens, standards and force range and we will help you select the right MTS solution.